Bosch Climate 5000 Series - Page 15

| 15
User Manual
Bosch Climate 5000 Series Remote Control (06.2022)
Operation of Buttons Continued
Figure 21
Button Description Function
FAN Button
Press this button to select the fan speed as follows:
AUTO --> LOW --> MED --> HIGH
Press the TEMP Up (
) or Down ( ) button to increase/decrease the fan speed in 1% increments.
NOTE: You can not switch the fan speed in AUTO or DRY mode
SWING Button
Press this button to activate/disable the horizontal louver auto SWING feature. The auto SWING feature will rotate
the louver up and down, blowing air into the room in a continuously moving up/down motion.
NOTE: Hold down for 2 seconds to activate the vertical louver auto swing feature.
SHORTCUT Button
Press this button to return to previous system settings, or hold for 2 seconds to restore current operational
settings.
TURBO Button
Press this button to Activate/Disable the TURBO function. TURBO function enables the unit to reach the preset
temperature at cooling or heating operation in the shortest time possible. The fan will run at a speed above HIGH.
LED Button
Press this button to Activate/Disable the indoor unit screen display. Press this button to light the display or clear
the display.
CLEAN Button Press this button to activate the units auto-clean feature.
Table 6