Bosch Climate 5000 Series - 2 x 2 Cassette Unit Remote Controller; Operation of Buttons

14
|
User Manual
Bosch Climate 5000 Series Remote Control (06.2022)
4 2 x 2 Cassette Unit Remote Controller
4.1 Operation of Buttons
Figure 20
Button Description Function
Power Button Press this button to turn the air conditioner ON or OFF.
MODE Button
Press this button to select the air conditioner / heat pump's mode of operation.
AUTO --> COOL --> DRY --> HEAT --> FAN
SLEEP Button
Press this button to Activate/Disable the SLEEP function.
— The SLEEP function can maintain the most comfortable temperature while saving energy. This
function is available in COOL, HEAT or AUTO modes only.
— For more information on the SLEEP function operation, please reference the unit's USER MANUAL.
NOTE: While the unit is running in SLEEP mode, it will be cancelled if the MODE, FAN SPEED or Power button is
pressed.
Temperature Control
UP Button(
): Push this button to increase the indoor temperature setting in 1°F increments , limited to 86°F.
DOWN Button( ): Push this button to decrease the indoor temperature setting in 1°F increments, limited to 62°F.
Press and hold the UP ( ) and DOWN ( ) buttons together for 3 seconds to alternate the temperature display
between the °C & °F scales.
NOTE: Temperature contol is not available in Fan mode.
SET Button
Press this button to scroll through functions as follows:
Fresh --> Follow Me --> AP Mode...
The selected symbol will fl ash on the screen. Press the OK button to Confi rm
For more information on the Set function, refer to section 3.4
NOTE: Fresh and AP mode are not available for this system
OK Button Press this button to confi rm selection functions.
TIMER Button
Press this button to initiate the auto-on time sequence.
Each press will increase the auto-timed setting in 30 minute increments. When the setting time displays 10.0,
each press will increase the auto-timed setting in 60 minutes increments. To cancel the auto-timed program,
simply adjust the auto-on time to 0.0.
Table 5