6 720 801 244 (2013/08) Compress 3000 DW FO
32 | Operation Instructions
▶ Press „-“.
Displays with blinking „del“ indication.
Fig. 37 „del“ function
▶Press „ok“.
The meter restarts the count.
5.7 Troubleshooting
This device is equipped with a troubleshooting function. Error
indication is performed by means of a code (Table 6, page 40)
corresponding to the error indication symbol in the digital
display (Fig. 17, [6]). In most cases, the device will only return
to normal functioning following elimination of the cause of the
malfunction and resetting of the device.
To identify the malfunction, see Section 7.
Fig. 38 Error code
Resetting the system
▶ Press the „ok“ key and hold it down for more than 3
seconds.
Fig. 39 Resetting the system
5.8 Factory configurations
Upon setting the temperature units and timetable, the device
will operate according to the factory set values.
Heating mode: „Combi“ ( section 5.6.1)
Manual functioning: „manual“ ( section 5.4)
Fig. 40 Initial menu
5.9 Selecting the temperature units - „°C“ or „°F“
Upon the 1
st
use, the user must select the temperature unit.
Fig. 41 Selecting the temperature units
▶ Press the „+“ or „-“ key to select the temperature unit.
To Next Page
Loading...
