Need help?Do you have a question about the Bosch Compress 3000 DW FO and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | Compress 3000 DW FO |
| Category | Water Heater |
| Language | English |
Defines warning symbols, keywords, and important information indicators.
Covers refrigerant, electrical, general, and specific safety warnings for safe operation.
Addresses scald risks, safe usage by persons, and installation compliance.
Lists the components included in the standard delivery package.
Diagrams and descriptions of the heat pump, user interface, and safety devices.
Covers defrosting, working conditions, overheating, and pressure/temperature protection.
Details model, operating modes, environmental temps, power supply, and component specifications.
Guidelines for safely storing and transporting the appliance, including manual and forklift methods.
Explains the refrigerant circuit and heat transfer process in the system.
Describes Heat Pump and Combi modes of operation and their conditions.
Provides diagrams with detailed measurements of the appliance.
Specifies required clearances for airflow, servicing, and appliance orientation.
Lists necessary tools and guidelines for selecting the installation location.
Details how to secure the unit and connect water piping.
Instructions for condensate drain and adherence to regulations.
Explains dielectric joints and provides instructions for condensate drain tubes.
Details the installation and function of the TPR valve for safety.
Covers thermal expansion tanks, mixing devices, and pressure/expansion valves.
Details power supply requirements, connection precautions, and wiring.
Covers electrical test requirements and installation configurations like heat recovery.
Guidelines for insulation blankets and filling the water storage tank.
Instructions on how to purge the system after filling.
Discusses water quality, Langelier Index, and conductivity for anodes.
A checklist for tank location and plumbing connections to ensure proper installation.
Checks condensate lines, relief valve, electrical connections, control panel, and front cover.
Describes the sequence of actions and indicators during initial unit startup.
Discusses compatibility with off-peak tariffs and optimization strategies.
Identifies the control panel and explains the meaning of display symbols and indicators.
Provides critical safety warnings for operating the water heater.
Explains display symbols for device status and operating modes ('auto', 'man').
Guides users on accessing and selecting operating modes like manual, P1, P2, P3, and Off.
Details the anti-freeze function and the fixed temperature set point.
Guides on accessing the main menu and its functions like Mode, Prog, Set, etc.
Explains the operation of "Heat pump" and "Combi" modes.
Guides on programming heating schedules using P1, P2, and P3 periods.
Step-by-step guide to setting up P2 and P3 operating periods for weekdays and weekends.
Guides on setting up silent mode periods for reduced noise levels.
Explains the "Leg" function for automatic bacteria elimination and its programming.
Guides on using the "Set" function for adjustments and activating the "Purg" function.
Explains how to use the "Info" function to view consumption data.
Guides on identifying error codes and resetting the system.
Details on selecting temperature units and factory configurations.
Step-by-step guide to setting the time and defining the first day of the week.
Overview of control usage for accessing operating modes and menus.
Covers routine inspections, PTR valve checks, and tank flushing.
Provides instructions for safely draining the water heater.
Guides for vacation shutdown, drain clearing, and refrigerant circuit safety.
Importance of anode rod for corrosion protection and its inspection.
Visual inspection of the anode rod and system refill process.
Guides on how to access the service menu for diagnostic functions.
Displays for ambient air temperature, power consumption, and defrost cycles.
How to view past faults using functions "1F" to "10F".
Functions for deleting history, showing all segments, and exiting the service menu.
Lists fault codes (E01-E11) and provides solutions or actions to take.
Explains various display indications like E04, E12, LEG, HOT, and COLD.
Provides a schematic diagram showing electrical components and their connections.
Outlines Bosch's strategy for environmental protection, packaging, and recycling.
Provides guidelines for the disposal of old appliances and safe refrigerant recovery.
Explains consumer rights and details warranty periods for parts and labour.
Lists warranty exclusions and how to make a warranty claim.
Details the process for submitting a warranty claim and required information.
Covers product safety, privacy policy, and Bosch contact details.
To Next Page