en Before using for the first time
14
KBefore using for the first
time
Bef or e us i ng f or t he f i r st ti me
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
The appliance must be fully installed and connected to
the mains.
Initial use
After connecting the electricity supply or after a power
cut, the display prompts you to set the time. It may take
a few seconds for the instruction to appear.
Setting the time
During initial use, the time display is highlighted.
The‚ƒ:‹‹ value flashes in the display and the 0
symbol lights up. Set the time.
1. Use the rotary selector to set the time.
2. Touch 0.
The time has now been set.
Changing the time on the clock
Note: To change the time on the clock, you will need to
switch off the appliance.
1. Touch the 0 button twice.
The 0 symbol and the clock time will appear on the
display.
2. Set the clock using the rotary selector.
3. Touch the 0 button.
The time has now been set.
Notes
■ If you do not touch the 0 button after setting the
time, the set value is automatically adopted after a
few seconds.
■ If the function selector has been moved to configure
the settings, it must be returned to the "Off" position
once you have finished. Only then can the appliance
be used.
■ In order to reduce the energy consumption of your
appliance in standby, you can hide the clock.
Set the water hardness range.
Set t i ng t he wat er har dness r ange
So that the appliance can reliably remind you to
descale it when required, you must set your water
hardness range correctly.
The water hardness range is set to 4(very hard) ex
works.
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(>40mg/l) or other liquids.
Only use fresh, cold, non-carbonated tap water or
softened water.
Notes
■ If your water is very hard, we recommend that you
use softened water.
■ If you only use softened water, you can set the water
hardness range to "softened" in this case.
■ If you use mineral water, set the water hardness
range to "4very hard".
■ If you use mineral water, you must only use non-
carbonated mineral water.
You can change the water hardness in the basic
settings.~ "Basic settings" on page 28
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed. One hour with Hot air < at 180 °C is
ideal for this. Ensure that no packaging remnants have
been left in the cooking compartment.
1. Use the function selector to set Hot air <.
2. Use the rotary selector to set to 180 ºC.
3. Touch start l stop.
The appliance begins to heat up.
Switch off the appliance after one hour. To do so, touch
start l stop and then turn the function selector to the off
position.
Cleaning the accessories
Before you use the accessories for the first time, clean
them thoroughly with hot soapy water and a soft dish
cloth.
Water hardness range Setting
0 0softened
1(up to 1.3 mmol/l) 1soft
2(1.3- 2.5 mmol/l) 2medium
3(2.5- 3.8 mmol/l) 3hard
4(above 3.8 mmol/l) 4very hard
Operating the appliance en
15
1Operating the appliance
Oper at i ng t he appl i ance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Note: The childproof lock can only be set if the
appliance is switched off. Some displays also remain
visible in the display when the appliance has been
switched off.
Switch off your appliance when it is not being used. If
no settings are applied for a long time, the appliance
switches itself off automatically.
Switching on the appliance
Turn the function selector to switch on the appliance.
A standard value is highlighted in the display. The
appliance is ready to use.
You can find out how to select the operating modes in
the individual chapters.
Switching off the appliance
Turn the function selector to the off position.
Any functions that may be running are cancelled.
The time appears in the display.
Note: You can set whether the clock should be
displayed when the device is switched off in the basic
settings.
Selecting an operating mode
After selecting an operating mode, default values are
shown in the display. You can start this setting
immediately.
The following always applies:
1. Use the function selector to select the operating
mode.
2. If necessary, apply other settings.
To do this, touch the appropriate field and use the
rotary selector to change the value.
3. Touch start l stop.
The appliance starts the operation. The
start l stop LED lights up.
Setting the heating function and temperature
Example: Hot air < at 200°C
1. Use the function selector to set the Hot air <
heating function.
A default temperature of 160 °C will appear on the
display.
2. Use the rotary selector to set the temperature to
200 °C.
3. Touch the start l stop button.
The appliance will start heating. The start l stop LED
will be lit. The length of the bar on the temperature
indicator gradually increases.
You can change the temperature at any time when the
appliance is heating using the rotary selector.
Notes
■ Once the appliance has heated up, slight
fluctuations in temperature are normal, depending
on the heating function.
■ When the appliance is heating, the temperature
cannot be set to 40 °C.
Setting the cooking time
1. Set the type of heating and temperature.
2. Touch 0 until the y symbol is highlighted.
3. Use the rotary selector to set the required cooking
time.
4. Touch start l stop.
The appliance begins to heat up. The
start l stop LED lights up. The cooking time starts
counting down.
Pausing the operation
1. Touch the start l stop field or open the appliance
door.
The operation is suspended and the
start l stop LED flashes.
2. Close the appliance door.
3. Touch the start l stop field.
The operation is continued and the start l stop LED
lights up.
To Next Page
Loading...
