Bosch CTL636ES6 User Manual

ImportAppliances.com
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
55
en
Service programmes
F
Important:
Before starting each service program
(Descale, Clean or Calc’nClean)
remove the brewing unit, clean as
instructed and replace it�
Be careful not to jam the milk tube
when closing the door�
After completion of each service
programme, wipe the appliance
immediately with a soft, damp cloth
to remove any residues from the
descaling and cleaning solution� It is
possible for corrosion to form under-
neath such deposits�
New sponge cloths may contain
salts� Salts can cause rust film on
stainless steel and must therefore be
washed out thoroughly before use�
Clean the beverage outlet, milk tubes
and connecting piece thoroughly�
Specially developed, suitable
descaling and cleaning tablets are
available from retail outlets or from
customer services (see the section
“Accessories”)�
Descaling
Takes about 21 minutes�
■ Touch E�
■ Touch [ Descale ] to select the
programme�
■ The display indicates the progress
of the programme�
■ Empty drip trays and replace�
■ Remove the water lter (if there is one)
and press C�
■ Pour lukewarm water into the empty
water tank up to the “0�5 l” mark and
then dissolve one Bosch descaling tablet
TCZ8002 in it�
F
If there is not enough descaling solu-
tion in the water tank, you will be asked
to do the following. Refill using uncar-
bonated water and press C again�
■ Remove the suction pipe from milk
container, wipe it and insert the end of the
suction pipe into the hole on the co󰀨ee
grounds container�
■ Close the appliance door�
■ Place a container with a capacity of
0�5 litre under the beverage outlet�
■ Press C� The descaling programme will
now run for about 19 minutes�
■ Remove the container and press C�
■ Rinse the water tank and (if removed)
replace the water lter.
■ Fill the tank with fresh water up to the
“max” indicator�
■ Replace the water tank and close the door.
■ Place the container underneath the
beverage outlet again�
■ Press C� The descaling programme will
now run for about 2 minutes and rinse the
appliance�
■ Remove the container, empty the drip
trays, replace and close the appliance door�
■ Press C. The appliance has nished
descaling and is ready for use again�
■ Touch E to exit the program�
Cleaning
Takes about 5 minutes�
■ Touch E�
■ Touch [ Clean ] to select the programme�
■ The display indicates the progress
of the programme�
■ Clean the beverage outlet and replace,
empty the drip trays and replace�
■ Open the ground co󰀨ee drawer, drop in
a cleaning tablet and close the co󰀨ee
drawer again�
■ Close the appliance door�
■ Place a container with a capacity of
0�5 litre under the beverage outlet�
■ Press C� The cleaning programme will
now run for about 5 minutes�
■ Remove the container, empty the drip trays,
replace and close the appliance door�
■ Press C. The appliance has nished
cleaning and is ready for use again�
■ Touch E to exit the program�

Bosch CTL636ES6 Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Milk adding type	Automatic
Number of spouts	1
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Built-in
Water tank capacity	2.4 L
Coffee beans capacity	500 g
Maximum operating pressure	19 bar
Reservoir for brewed coffee	-
Cord length	1.7 m
Display type	TFT
Product color	Black, Stainless steel
AC input voltage	220–240 V
AC input frequency	50 - 60 Hz
Package depth	670 mm
Package width	475 mm
Package height	545 mm
Package weight	22420 g

Weight and Dimensions

Depth	375 mm
Width	594 mm
Height	455 mm
Weight	19440 g
Installation compartment depth	356 mm
Installation compartment width	558 mm
Installation compartment height	449 mm