Bosch D720 - Special Alert Commands; COMMAND 9: Engage Special Alert

24
Special Alert
❒ I have this feature.
❒ I do not have this feature.
❒ This feature requires a passcode.
This command is a manually operated and initiated alarm command.
COMMAND 9 can be programmed to respond to a choice of numerous
situations that may need immediate attention. This command may also be
used to send a silent alarm to your security company without sounding an
alarm signal on the premises. Check with your security company for the
options they offer.
COMMAND 9
To engage COMMAND 9:
1. Press the COMMAND bar. The Command Mode indicator light comes
on.
2. Press the 9 key. Your COMMAND 9 special alert has been pro-
grammed to:
_____ notify your alarm company
_____ ring a bell on your premises
Description:
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________