To Next PageTo Next Page
Need help?Do you have a question about the Bosch DINION IP 3000i IR and is the answer not in the manual?
General| Lens Type | Fixed |
|---|---|
| IR Illumination | Yes |
| Day/Night Functionality | Yes |
| Power Supply | PoE or 12 V DC |
| Camera Type | Bullet |
| Environment | Outdoor |
| Vandal Resistant | No |
| Day/Night | Yes |
| Ethernet Port | Yes |
| Ingress Protection | IP66 |
| Compression | H.264, MJPEG |
| IR Distance | Up to 30 m |
| Focal Length | 2.8 mm |
| Minimum Illumination | 0.05 Lux |
| Operating Temperature | -30°C to +60°C |
| Sensor Type | 1/2.9" CMOS |
Lists hardware and software requirements for accessing the camera via browser.
Explains how to connect to the camera using its IP address in a web browser.
Details password requirements for device access, including length and character types.
How to search for specific recorded video content.
Steps to export recorded video sequences from the device.
Customizing the web interface appearance and website language.
Adjusts lens focus for motorized cameras, considering day/night and IR correction.
Describes camera location and perspective for video analytics calibration.
Calibration of mounting position using height, roll, tilt, and focal length.
Manual calibration method using visual elements to describe perspective.
Steps for manual camera calibration using sketch tools for precise settings.
Defines camera position using Cartesian or WGS 84 systems for analytics mapping.
Controls how the camera reproduces accurate colors under various lighting conditions.
Automatic Light-level Control adjusts video output based on ambient light.
Manages automatic or fixed exposure settings for optimal image capture.
Controls the IR cut-off filter for optimal performance in day or night conditions.
Links recording profiles to specific days and times for automated recording.
Guides on configuring VCA using the Bosch Configuration Manager or browser.
Detects tampering of cameras and cables using various methods.
Compares current video to a reference image to detect tampering.
Steps to update the camera's firmware.
Instructions on performing a hardware reset to restore factory defaults.
