8. Configure the system using the Configuration Wizard. To do this, go through the wizard
and follow the instructions on the screen.
See also:
Using Configuration Wizard, page 13
Using Configuration Wizard
Intended use for Configuration Wizard is the quick and easy configuration of a smaller system.
Configuration Wizard helps you to achieve a configured system including VRM, iSCSI system,
cameras, recording profiles and user groups.
User groups and their permissions are configured automatically. You can add or remove users
and set passwords.
Configuration Wizard can access Management Server only on the local computer.
Configuration Wizard adds the local VRM automatically.
To achieve a quick configuration using the Configuration Manager Wizard:
1. On the default screen, double-click the Configuration Wizard icon. The Welcome page is
displayed.
2. Run-through the following pages of the wizard.
Welcome page
4 Click Next > to start the configuration.
Notice!
If VRM is not available on the computer or the license check fails, a corresponding error
message is displayed. You cannot continue working with Configuration Wizard.
4.4
DIVAR IP 2000 System setup - first steps | en 13
Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC
To Next Page
Loading...
