1 1x eSATA for data export
Note: Do not connect hard disk drives
for recording.
4 2x USB 3.0
2 1x Ethernet (RJ45) 5 1x VGA (monitor)
3 2x USB 2.0 6 Mains connection 100 - 240 VAC
LED description - front panel
This chapter describes the LED displays on the front of the chassis.
LED indicator LED color LED state Description
Power LED N/A Off Power off
Blue On (default) Working (S0 state)
HDD LED N/A Off No disk access
Blue Blinking Disk access
LAN LED N/A Off Network disconnected
Blue On Network connected
Blue Blinking Network activity
System LED N/A Off Power off
2.3.1
DIVAR IP 2000 System overview | en 9
Bosch Sicherheitssysteme GmbH Installation Manual 2013.05 | V1 | DOC
To Next Page
Loading...
