EasyManua.ls Logo

Bosch DVA-12T - Fault Tolerance Management

Bosch DVA-12T
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46 en | Specifications RAID Subsystem DVA-12T | Installation Manual
F.01U.027.798 | V1 | 2006.06 Bosch Security Systems
7.7 Fault Tolerance Management
Event Broadcast/Alert Yes (via RAIDWatch sub-modules, the Configuration Client utility or
NPC)
Event Notification Yes (via RAIDWatch sub-modules, Configuration Client or NPC)
Hardware Connection In-band over Ethernet, or RS-232C
Configuration on Disk Configuration data stored on disks for logical drive assemblies to
exist after controller replacement; basic settings, e.g., channel
mode settings, are stored on NVRAM
Failure Indicator Via alarm, LCD panel, RAIDWatch Manager session, or terminal
emulation
Specification
Battery Back-up Option Yes
Automatic Drive Failure Detection Yes
Automatic Rebuild on Spare Drives Yes
Regenerate Logical Drive Parity Yes
Bad Block Reassignment Yes
Automatic Rebuild upon Failed Drive Replace-
ment
Yes
Manual Clone of Suspected Failed Drive Yes
Concurrent Rebuild on Multiple Drives in a
RAID (0 + 1) Logical Drive
Yes
Salvage the 2
nd
Temporarily Failed Drive in a
RAID 1, 3 or 5 Logical Drive
Yes
Salvage the 1
st
Temporarily Failed Drive in a
RAID 0 Logical Drive
Yes

Table of Contents

Other manuals for Bosch DVA-12T

Related product manuals