EasyManua.ls Logo

Bosch DVB-T2 Gen2 - Selecting the Audio Language and Subtitles; TV Settings; Radio Mode

Bosch DVB-T2 Gen2
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 | en
7 620 320 035 | 11.2021 Robert Bosch GmbH
Storing channels in the favourites
list (“myList”)
f If necessary, press the red
button
(14)
to switch to the channel list.
f Use the P+ / P– buttons
(15)
to select a
channel in the list.
f Press the OK button
(6)
to mark the
channel.
A preview picture of the channel as well as its
current signal strength and reception quality
are displayed.
f Press the blue
button
(8)
.
The channel is added to the end of the
favourites list.
Managing channels in the favour
-
ites list (“myList”)
f If necessary, press the red
button
(14)
to switch to the favourites list.
f Use the P+ / P– buttons
(15)
to select a
channel in the list.
f Press the OK button
(6)
to mark the
channel.
A preview picture of the channel as well as its
current signal strength and reception quality
are displayed.
To delete the marked channel,
f press the blue
button
(8)
.
To change the position of the marked channel
in the list,
f press the yellow
button
(13)
.
f Use the P+ / P– buttons
(15)
to select the
desired position in the list.
f Press the yellow
button
(13)
again.
Selecting the audio language and
subtitles
Some channels provide various audio lan
-
guages and/or subtitles for the entire channel
or for specific programmes.
f If necessary, press the i button
(11)
to
display the channel information.
f For subtitles, press the green
button
(10)
. For audio languages, press the
yellow
button
(13)
.
f Use the P+ / P– buttons
(15)
to select the
desired setting.
f Press the OK button
(6)
.
TV settings
f Press the
button
(16)
.
f Use the
/ buttons
(7)
and P+ /
P– buttons
(15)
to select the TV settings
.
f Press the OK button
(6)
.
f Use the P+ / P– buttons
(15)
to select the
picture adjustment setting.
f Press the OK button
(6)
.
f Use the
/ buttons
(7)
and P+ /
P– buttons
(15)
to select the desired
setting.
f Press the
button
(5)
(several times as
needed) to return to the next higher menu
level or to exit the menu.
Radio mode
When radio mode starts, the current station is
played. The radio station’s logo, its current
signal strength and reception quality as well as
the station list or favourites list (“myList”) are
displayed.
TV mode | Radio mode

Related product manuals