Bosch DVB-T2 Gen2 - Starting and Controlling the Slide Show; System Settings; Opening the System Settings Menu; Setting the Display Duration for the On-Screen Menu

en | 13
7 620 320 035 | 11.2021Robert Bosch GmbH
f press the yellow button
(13)
to stop
playback.
f press the blue
button
(8)
to switch to
the next file.
Starting and controlling the slide
show
To start the slide show,
f press the green
button
(10)
in the
photo list view.
To control the slide show,
f press the i button
(11)
while the slide
show is running in order to display the file
information.
f Then press
f the 1 button
(12)
to activate/
deactivate shuffle playback.
f the 2 button
(12)
to activate/
deactivate repeat playback.
f the 3 button
(12)
(several times as
needed) to set how long each picture
should be displayed (standard: 3 sec.
/ +2 presses: 5 sec. / +4 presses: 7
sec.).
System settings
Opening the system settings menu
f Press the
button
(16)
.
f Use the
/ buttons
(7)
and P+ /
P– buttons
(15)
to select the system
settings
.
f Press the OK button
(6)
.
Setting the display duration for the
on-screen menu
Note:
The display duration that is set also
applies to the channel information
display.
To set the display duration for the on-screen
menu and the channel information,
f press the green
button
(10)
(several
times as needed) to switch between the
following options:
f
: Standard display duration 5 sec.
f
+2
: Display duration 7 sec.
f
+4
: Display duration 9 sec.
f Press the
button
(5)
(several times as
needed) to return to the next higher menu
level or to exit the menu.
Restoring the factory default
settings
f Press the yellow
button
(13)
.
f Use the + / – buttons
(7)
and P+ /
P– buttons
(15)
to select the “Yes” option.
f Press the OK button
(6)
.
The device switches off automatically and
restores the factory default settings.
Checking the antenna reception
performance
f Press the
button
(16)
.
f Use the + / – buttons
(7)
and P+ /
P– buttons
(15)
to select the TV settings
.
f Press the OK button
(6)
.
USB mode | System settings