en | 15
7 620 320 035 | 11.2021Robert Bosch GmbH
The software versions are displayed for the
device and for the update.
Note:
The software update consists of two
parts:
1. Device firmware
2. TV tuner firmware
To start the software update,
f use the + / – buttons
(7)
to select the Yes
option.
f Press the OK button
(6)
.
The software update for the device firmware is
then executed. The estimated length of time
for the update process is displayed (around 1
minute).
Note:
If the update cannot be performed
successfully, a corresponding error
message appears. The device can
then continue to be operated as
normal with the present software.
If the device software update is completed
successfully, a corresponding notification
appears.
f Press the OK button
(6)
.
The device is restarted, and the second part of
the update (TV tuner firmware) is carried out.
The estimated length of time for the update
process is displayed (around 5 minutes).
Notes:
f If the update cannot be per
-
formed successfully, a corre-
sponding error message
appears. The device can then
continue to be operated as
normal with the present
software.
f If the update is interrupted, for
example, owing to an interrup
-
tion of the power supply, it will
automatically be restarted the
next time the device is switched
on.
If the device software update is completed
successfully, a corresponding notification
appears.
f Press the OK button
(6)
.
The device will restart.
List of compatible USB storage devices:
f SanDisk Ultra Dual 32 GB USB 3.0
f Transcend JetFlash 530 8 GB Retractable
USB 2.0
f SanDisk Ultra USB 3.0 16 GB
f Intenso USB 2.0 Drive
f Patriot Supersonic Boost XT 8 GB (USB
3.2 Gen 1)
Note:
It cannot be guaranteed that other
USB storage devices will function.
Software update
To Next Page
Loading...
