Bosch Easy Series ICP-EZM2 - Add;Change Users; Add Users; Change Users

Add/Change Users
Enter the User Telephone Menu
1. Connect to the phone test posts or use the house phone.
+
2. Hold down the test button for 10 seconds.
3. Enter the Master Passcode default 1234(55).
Add users
Add Users
1. Enter the User Telephone menu.
2. Enter the Master User (User 1) passcode
3. Press [4] to enter the user menu.
4. Press [1] to add a new user
5. Repeat step 4 for additional users.
Press [#] to return to the User Menu, or [#][#][#] to exit completely.
Change users
Change Users
1. Enter the User Telephone Menu.
2. Enter the Master User (User 1) passcode.
3. Press [4] to enter the User Menu.
4. Press [2] to change a user. Press [2] repeatedly until the system speaks the desired user
number.
5. Repeat Step 4 in Add Users.
6. Press [#] to return to the User Menu, or [#][#][#] to exit completely.
4
4.1
4.2
10 en | Add/Change Users Easy Series Control Panel
2014.09 | 01 | F.01U.306.216 Quick Start Guide Bosch Security Systems, Inc.