English–1
2 609 932 090 • (02.12) T
Please observe the order number of your machine. The trade names of the individual machines may vary.
1
Speed selector thumbwheel (GEX 270 AE)
2
On-Off switch
3
Locking button for On-Off switch
4
Dust box (micro-filtersystem)
5
Sanding plate
6
Sanding sheet*
7
Holder
8
Outlet piece
9
Latching lever
10
Filter element (micro-filtersystem)
11
Backing plate
12
Screws (TX 20)*
13
L-type Torx key (accessory kit)*
14
Extraction adapter*
* Not all the accessories illustrated or described are in-
cluded in standard delivery.
Measured values determined according to EN 50 144.
The A-weighted sound pressure level of the product is
typically 83 dB(A). The noise level when working can
exceed 85 dB(A).
Wear ear protection!
The weighted acceleration is typically 6.0 m/s
2
.
The machine is intended for dry sanding of wood,
plastic, metal and filler material as well as painted sur-
faces.
Machines with electronic control are also suitable for
polishing.
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
In addition, the general safety notes
in the enclosed booklet must be ob-
served.
Before using for the first time, ask
for a practical demonstration.
■
If the cable is damaged or cut through while work-
ing, do not touch the cable but immediately pull the
power plug. Never use the machine with a dam-
aged cable.
■
Connect machines that are used outdoors by
means of a fault current protection switch (FI) with a
maximum triggering current of 30 mA. Use only an
extension cable that is approved for outdoor use.
■
Wear safety glasses.
■
Safety gloves are recommended.
■
Always direct the cable to the rear away from the
machine.
■
Always hold the machine firmly when working and
provide for a secure stance.
Product Specifications
Eccentric Sander GEX 270 A GEX 270 AE
Order number
0 601 37A 0.. 0 601 37A 7..
Rated input power [W] 270 270
Power output [W] 125 125
No-load speed [RPM] 12000 7500–12000
No-load oscillation rate [RPM] 24000 15000–24000
Speed selection –
●
Eccentricity
[mm] 4.0 4.0
Sanding plate dia. [mm] 125 125
Weight (without accessories) approx. [kg] 1.5 1.5
Protection class /
II
/
II
Product Elements
Noise/Vibration Information
Intended Use
For Your Safety
To Next Page
Loading...
Need help?
General
