Bosch GKT13-225L - Specifications

10
Getting to Know Your Track
NOTE: For tool specifications refer to
the nameplate on your tool.
Certified to
CAN/CSA C22.2 No. 62841-2-5-16
UL 62841-2-5 (Ed.1)
in conjunction with
CAN/CSA C22.2 No. 62841-1-15
UL 62841-1 (Ed.1)
Including CSA Initial factory evaluation
Model number GKT13-225
Blade 6-1/2"
Blade arbor hole 20mm Round
Tooth thickness
0.1" (2.6mm)*
*minimum 0.07" (1.8mm)
Blade thickness 0.07" (1.8mm) Maximum
Depth of cut at 90° 2-1/4" (57mm) Maximum
Depth of cut at 45° 1.65" (42mm) Maximum
Depth of cut at 47° 1.6" (40.8mm) Maximum
Specifications
41
49
40
42
40
42
51
42
43
45
46
52
48
44
44
44
50
47
40 Track
41 Track Connector
42 Anti-splinter edge
43 Miter guide
44 End cap, left
45 End cap, right
46 Miter angle indicator
47 Fence
48 Miter locking knob
49 Traction strip
50 Track Clamps (x2)
51 Spikes
52 Travel Stop
Fig. 2
2610051844.qxp_GKT13-225 9/17/18 10:16 AM Page 10