Getting to Know Your Saw
Disconnect the plug from the power source before making any
assembly, adjustments or changing accessories. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Track Saw
Fig. 1
1 On/Off switch
2 Lock-off button (for
On/Off switch)
3 Depth lock lever
4 Auxiliary handle
(insulated gripping
surface)
5 Hex wrench
6 Cutting-depth scale
7 Footplate (Base plate)
8 Cutting-depth indicator
9 Bevel scale
10 Wing bolt for rip fence**
11 Bevel adjustment knob,
front
12 Button for 47° bevel angle
13 Viewing window
14 Rip fence**
15 Blade guard
16 Button for –1° bevel angle
17 Bevel lock knob, rear
18 Swiveling dust port
19 Handle (insulated
gripping surface)
20 Blade stud*
21 Outer washer*
22 Saw blade* **
23 Inner washer*
24 Speed dial
25 Shaft lock button*
26 Blade shaft*
27 Depth stop slider
28 Line guide 0° *
29 Line guide 45° *
30 Plastic insert*
31 Knurled alignment knobs*
32 Direction of rotation
arrow
33 Straight edge guide*
34 Vacuum hose * **
35 Front cut limit mark*
36 Rear cut limit mark*
* Not Shown. See further in
these operating
instructions.
** Sold separately
Insulated gripping
surfaces
To Next Page
Loading...
