To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLL3-300G and is the answer not in the manual?
General| Laser Class | Class 2 |
|---|---|
| Leveling Type | Self-Leveling |
| Self-Leveling Range | ±4° |
| Mount Threading | 1/4-20 |
| IP Rating | IP54 |
| Self-leveling Time | <4 s |
| Power Source | Battery |
| Battery Type | AA |
| Operating Temperature | -10°C to +50°C |
Alerts user to potential personal injury hazards and requires following safety messages.
Indicates a hazardous situation that could result in death or serious injury if not avoided.
Do not stare into the laser beam or direct it at others; can cause blindness.
Stay alert, use common sense, wear safety equipment, and be cautious around electrical hazards.
Instructions on how to insert and replace batteries, including polarity and replacement advice.
Guides on how to turn the tool on and off, and notes on automatic shut-off due to temperature.
Details the different modes for generating horizontal, vertical, and multiple laser planes.
Describes automatic leveling and how to use it for precise line projection within a ±4° range.
Step-by-step guide to check the accuracy of the horizontal laser line using walls and measurements.
Procedure to check the accuracy of the vertical laser line against a plumb line using a door opening.
