To Next PageTo Next Page
Need help?Do you have a question about the Bosch GLM Professional 150 and is the answer not in the manual?
Read and observe all instructions for safe operation of the measuring tool and avoid hazardous situations.
Do not look into the laser beam, avoid directing it at people or animals, and use protective measures.
Details the purpose and application range of the measuring tool for various tasks.
Provides detailed specifications like measuring range, accuracy, power, dimensions, and environmental limits.
Identifies and describes the various buttons, display elements, and physical components of the measuring tool.
Instructions for proper battery installation and replacement for reliable tool operation.
Guidance on initial setup, protecting the tool, and switching it on/off safely to prevent hazards.
Explains how to choose different reference planes for accurate measurements based on the application.
Covers continuous laser mode, display illumination, audio signals, and changing measurement units.
Details simple length, continuous tracking, and minimum/maximum measurement procedures.
Covers the process for calculating areas and volumes using the tool's integrated functions.
Explains measurements using Pythagoras theorem and trapezium calculations for inaccessible distances.
Covers measurements with time delay and calculating wall surface areas for specific scenarios.
Details wall surface calculation and the mark-out mode for setting reference lengths for layout tasks.
Describes how to recall, view, and manage stored measurement data for review and analysis.
Provides general guidance on tool operation, environmental influences, and positioning pin usage.
Instructions for deleting individual or list entries and adding measurement values for calculations.
Instructions for subtracting measurement values from each other to find differences.
Identifies causes of errors and provides corrective measures for common issues encountered during operation.
Method to verify the measuring tool's accuracy against a known distance using specific steps.
Guidelines for proper care, cleaning, and storage of the measuring tool to ensure longevity.
Information on environmentally friendly disposal of the measuring tool and batteries within EC countries.
Read and observe all instructions for safe operation of the measuring tool and avoid hazardous situations.
Do not look into the laser beam, avoid directing it at people or animals, and use protective measures.
Details the purpose and application range of the measuring tool for various tasks.
Provides detailed specifications like measuring range, accuracy, power, dimensions, and environmental limits.
Identifies and describes the various buttons, display elements, and physical components of the measuring tool.
Instructions for proper battery installation and replacement for reliable tool operation.
Guidance on initial setup, protecting the tool, and switching it on/off safely to prevent hazards.
Explains how to choose different reference planes for accurate measurements based on the application.
Covers continuous laser mode, display illumination, audio signals, and changing measurement units.
Details simple length, continuous tracking, and minimum/maximum measurement procedures.
Covers the process for calculating areas and volumes using the tool's integrated functions.
Explains measurements using Pythagoras theorem and trapezium calculations for inaccessible distances.
Covers measurements with time delay and calculating wall surface areas for specific scenarios.
Details wall surface calculation and the mark-out mode for setting reference lengths for layout tasks.
Describes how to recall, view, and manage stored measurement data for review and analysis.
Provides general guidance on tool operation, environmental influences, and positioning pin usage.
Instructions for deleting individual or list entries and adding measurement values for calculations.
Instructions for subtracting measurement values from each other to find differences.
Identifies causes of errors and provides corrective measures for common issues encountered during operation.
Method to verify the measuring tool's accuracy against a known distance using specific steps.
Guidelines for proper care, cleaning, and storage of the measuring tool to ensure longevity.
Information on environmentally friendly disposal of the measuring tool and batteries within EC countries.
General| Accuracy | ± 1.5 mm |
|---|---|
| Laser Diode | 635 nm, < 1 mW |
| Measuring Accuracy (typical) | ± 0.2° |
| Measurement Time, Max. | 4 s |
| Dust and Splash Protection | IP 54 |
| Tripod Thread | 1/4" |
| Protection Class | IP 54 |
| Laser Class | 2 |
| Power Supply | 2x AAA batteries |
| Measurement Time, Typical | 0.5 s |
| Automatic Deactivation | 5 min |
| Units of Measurement | m, ft |
| Memory Capacity (values) | 30 |
| Battery Life | Approx. 10, 000 measurements |
| Storage Temperature | -20°C to +70°C |
