27
“Tool” Menu
Select the menu “Tool” in the menu “Settings”.
Use button 4 [+] or 11 [–] to select the desired tool setting
and confirm with button 13 [Func]. Select the desired tool
setting.
To exit the “Tool” menu (o), press the On/Off/Clear button
9 [
] or soft key 12 [ ].
Tool Settings
Language
Time & Date
ft/m Measurement unit
Angle unit
#MVF)PVOE
Tool Information
Audio Signals
Shutdown Time
Dimming
#SJHIUOFTT
Auto Rotate
Setting the Language
Select the language in the basic settings (general settings).
Set the required language and confirm by pressing button
13 [Func].
Setting the Date and Time
Select the date and time in the basic settings (general
settings).
Set the date and time and confirm by pressing soft key
12 [
].
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
