Bosch GSB 12V-15 - Product Description and Specifications; Intended Use; Technical data; Noise;vibration information

English | 13
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for tightening and loosening
screws, as well as for drilling in wood, metal, ceramic and
plastic and for impact drilling in brick, masonry and stone.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Operating mode presetting ring
(5)
Gear selector switch
(6)
Rotational direction switch
(7)
Battery release button
(8)
Battery
(9)
Battery charge indicator
(10)
On/off switch
(11)
Worklight (LED)
(12)
Handle (insulated gripping surface)
(13)
Drill bit
A)
(14)
Universal bit holder
A)
(15)
Screwdriver bit
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless combi drill GSB12V-15
Article number
3601JB69..
Rated voltage V= 12
No-load speed
A)
– First gear min
-1
0–380
– Second gear min
-1
0–1 300
Impact rate
A)
min
-1
0–19 500
Cordless combi drill GSB12V-15
Max. torque, hard/soft
screwdriving application ac-
cording to ISO 5393
A)B)
Nm 30/15
Max. drilling diameter
– Masonry mm 10
– Steel mm 10
– Wood mm 19
Max. screw diameter mm 7
Chuck capacity mm 1–10
Weight according to
EPTA-Procedure01:2014
kg 1.1–1.3
Recommended ambient tem-
perature during charging
°C 0 to +35
Permitted ambient temperat-
ure during operation
C)
and
during storage
°C –20 to +50
Recommended rechargeable
batteries
GBA 12V...
Recommended chargers GAL 12...
GAX 18...
A)
measured at 20–25°C with battery GBA 12V 1.3Ah.
B) Depends on battery in use
C) Limited performance at temperatures <0°C
Noise/vibration information
Noise emission values determined according to
EN62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 82dB(A); sound power level
93dB(A). Uncertainty K=5dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according toEN62841-2-1:
Drilling into metal: a
h
<2.5 m/s
2
, K=1.5 m/s
2
,
Impact drilling into concrete: a
h
=12.5m/s
2
, K=1.5m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Bosch Power Tools 1 609 92A 4JP | (27.05.2020)