To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 12V-15 and is the answer not in the manual?
General| Battery Voltage | 12V |
|---|---|
| Max Torque | 30 Nm |
| No-load Speed (1st gear) | 0 - 400 rpm |
| No-load Speed (2nd gear) | 0 - 1300 rpm |
| Drilling Diameter in Wood | 19 mm |
| Drilling Diameter in Steel | 10 mm |
| Weight with Battery | 0.95 kg |
| Battery Type | Li-Ion |
| Max Screw Diameter | 7 mm |
| Torque (soft/hard) | 15/30 Nm |
| Torque Settings | 20+1 |
| Chuck Capacity | 1 mm - 10 mm |
General safety warnings, instructions, illustrations, and specifications for power tools.
Ensure plug compatibility, avoid body contact with earthed surfaces, keep away from rain/wet.
Stay alert, use common sense, wear protective equipment, prevent unintentional starting.
Use correct power tool for application, do not use if switch is damaged, disconnect power before adjustments.
Recharge only with specified charger, use designated batteries, keep away from metal objects.
Have power tool serviced by qualified personnel using identical replacement parts.
Safety instructions for operations, long drill bits, and additional warnings.
Tool is intended for tightening/loosening screws, drilling in wood, metal, ceramic, plastic and impact drilling.
Lists technical specifications like article number, voltage, speed, torque, drilling diameter, weight, temperatures.
Noise emission values and vibration total values determined according to EN standards.
Tool driven by electric motor via gear and impact mechanism. Working procedure in two phases.
Insert battery, set rotational direction, switch on/off.
Keep tool and ventilation slots clean.
Customer service for repair, maintenance, spare parts, and product advice.
