To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 13 PROFESSIONAL and is the answer not in the manual?
General| No-load speed | 0 - 2800 rpm |
|---|---|
| Chuck capacity | 1.5 - 13 mm |
| Drilling diameter in concrete | 13 mm |
| Drilling diameter in wood | 25 mm |
| Drilling diameter in steel | 10 mm |
| Tool dimensions (length) | 266 mm |
| Tool dimensions (height) | 180 mm |
| Drilling diameter in masonry | 15 mm |
| Screw diameter | 8 mm |
| Power output | 300 W |
| Impact rate | 44800 bpm |
Comprehensive safety guidelines covering work area, electrical, personal safety, and tool usage. Failure to follow may result in injury.
Defines the primary applications of the machine, including drilling in various materials and screwdriving.
Details the individual components and parts of the power tool with reference to diagrams.
Instructions for using screwdriver bits with a universal bit holder for driving screws.
Guidance on attaching and adjusting the auxiliary handle for secure and comfortable operation.
Steps for inserting and removing drill bits using keyless or key-type chucks.
Procedures for removing and mounting the keyless or key-type drill chucks.
Safety precautions and recommendations for dust extraction during operation.
Instructions on connecting to power, observing voltage, and initial machine startup.
How to change the drill's rotation direction using the switch, only when the machine is stopped.
Guidance on selecting between drilling and impact drilling modes using the selector switch.
Procedures for starting, stopping, and locking the On/Off switch for continuous operation.
How to vary speed/impact rate by trigger pressure and preselect using the thumbwheel.
