To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSB 12 and is the answer not in the manual?
General| Voltage | 12 V |
|---|---|
| Battery type | Li-Ion |
| Max Torque | 30 Nm |
| No-load speed | 0 - 1300 rpm |
| Chuck Size | 10 mm |
| Max. drilling diameter in steel | 10 mm |
| Type | Cordless drill |
| No-load speed (1st gear / 2nd gear) | 0 – 1.300 rpm |
Technical details for Cordless Screwdriver models like no-load speed, torque, drilling diameter, and weight.
Technical details for Cordless Impact Drill models including speed, impact rate, torque, drilling diameter, and weight.
Information on battery temperature control, rated voltage, capacity (NiCd and NiMH), and approximate weight.
Essential safety advice including wearing eye protection, hair protection, and ensuring machine integrity.
Instructions for safe handling, charging, and disposal of batteries and chargers to prevent hazards.
Steps for battery charging, installing the auxiliary handle, changing tools, and initial machine operation.
Guidance on inserting the battery, switching the tool on/off, using the electric brake, and selecting gears.
Details on automatic spindle locking for tool changes and adjusting the torque setting for screwdriving.
Instructions for performing standard drilling and hammer drilling operations with the appropriate settings.
How to reverse rotational direction, replace the drill chuck, and handle the soft grip for better ergonomics.
Step-by-step guide for replacing worn carbon brushes and general machine cleaning.
Information on recycling, proper disposal of batteries (Ni-Cd, Ni-MH), and environmental considerations.
Measured noise and vibration levels according to EN standards, with recommendations for hearing protection.
Contact information for service and customer support in Great Britain, Australia, and Ireland.
