Bosch GSB 12 - Tool Specifications; Cordless Screwdriver Specifications; Cordless Impact Drill Specifications; Battery Specifications

English - 1
Tool Specifications
Cordless screwdriver GSR 12 VE-2 14,4 VE-2 18 VE-2 24 VE-2
Order number 0 601 ... 912 5.. 912 4.. 912 3.. 912 2..
No-load speed
1st gear [rpm] 0–400 0–400 0–400 0–400
2nd gear [rpm] 0–1 400 0–1 400 0–1 300 0–1 300
Torque adjustment range [Nm] 2–10 2–10 2–10 2–10
Torque, max.
Soft screwdriving case [Nm] 26 30 38 44
Hard screwdriving case [Nm] 65 70 80 85
Drilling dia., steel, max. [mm] 13 13 13 16
Drilling dia., wood, max. [mm] 32 35 38 40
Screw diameter, max. [mm] 8 10 12 14
Chuck clamping range [mm] 1.5–13 1.5–13 1.5–13 1.5–13
Drill spindle thread 1/2 " 1/2 " 1/2 " 1/2 "
Weight without battery, approx. [kg] 1.6 1.6 1.6 1.6
Cordless impact drill and
screwdriver
GSB 12 VE-2 14,4 VE-2 18 VE-2 24 VE-2
Order number 0 601 ... 913 5.. 913 4.. 913 3.. 913 2..
No-load speed
1st gear [rpm] 0–500 0–500 0–500 0–500
2nd gear [rpm] 0–1 700 0–1 750 0–1 800 0–1 800
Impact rate [bpm] 0–21 000 0 –21 000 0 – 21 000 0–21 000
Torque adjustment range [Nm] 1.5 – 9 1.5–9 1.5 – 9 1.5–9
Torque, max.
Soft screwdriving case [Nm] 22 24 28 34
Hard screwdriving case [Nm] 60 65 70 75
Drilling dia., steel, max. [mm] 13 13 13 16
Drilling dia., wood, max. [mm] 30 32 35 38
Drilling dia., masonry, max. [mm] 10 12 14 16
Screw diameter, max. [mm] 8 8 10 12
Chuck clamping range [mm] 1.5–13 1.5–13 1.5–13 1.5–13
Drill spindle thread 1/2 " 1/2 " 1/2 " 1/2 "
Weight without battery, approx. [kg] 1.8 1.8 1.9 1.9
Battery
Temperature control NTC NTC NTC NTC
Rated voltage [V=] 12 14.4 18 24
Capacity NiCd [Ah] 2.4 2.4 2.0 2.0
Weight NiCd, approx. [kg] 0.7 0.8 0.9 1.4
Capacity NiMH [Ah] 2.6 2.6 2.6 2.6
Weight NiMH, approx. [kg] 0.7 0.8 1.0 1.3
Please observe the order number of your machine. The trade names of the individual machines may vary.
12 • 2 609 932 156 • 03.04