Bosch GSB 18 VE-2 LI Professional - Noise and Vibration Information

22 | English
2 609 932 684 | (14.10.09) Bosch Power Tools
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
GSR14,4VE-2LI/GSR18VE-2LI
Typically the A-weighted sound pressure level of
the product is 72 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
a
h
=2.5 m/s
2
, Uncertainty K =1.5 m/s
2
,
Screwdriving: Vibration emission value
a
h
=2.5 m/s
2
, Uncertainty K =1.5 m/s
2
.
GSB14,4VE-2LI/GSB18VE-2LI
Typically the A-weighted noise levels of the
product are: Sound pressure level 93 dB(A);
Sound power level 104 dB(A). Uncertainty
K=3dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
a
h
=2.5 m/s
2
, Uncertainty K =1.5 m/s
2
,
Impact drilling into concrete: Vibration emission
value a
h
=13 m/s
2
, Uncertainty K =1.5 m/s
2
,
Screwdriving without impact: Vibration emis-
sion value a
h
=2.5 m/s
2
, Uncertainty
K=1.5m/s
2
.
Combination Cordless Drill GSB 14,4 VE-2 LI
Professional
GSB 18 VE-2 LI
Professional
Article number
3 601 H59 T.. 3 601 H59 T.. 3 601 H59 S.. 3 601 H59 S..
with battery
“premium” “compact” “premium” “compact”
Rated voltage
V= 14.4 14.4 18 18
No-load speed
– 1st gear
– 2nd gear
min
-1
min
-1
0–380
0–1700
0 – 380
0 – 1700
0 – 480
0 – 2050
0–480
0–2050
Impact frequency at no-load
min
-1
25500 25500 30750 30750
Max. torque for hard/soft
screwdriving application ac-
cording to ISO 5393
Nm 75/30 40/23 80/32 45/25
Max. drilling dia.
– Steel
– Wood
– Brickwork
mm
mm
mm
13
40
14
13
35
12
13
45
16
13
40
14
Max. screw dia.
mm 10 10 10 10
Chuck clamping range
mm 1.5–13 1.5– 13 1.5 – 13 1.5 – 13
Drill spindle thread
1/2" 1/2" 1/2" 1/2"
Weight according to
EPTA-Procedure 01/2003
kg 2.4 2.2 2.5 2.3
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
OBJ_BUCH-690-007.book Page 22 Wednesday, October 14, 2009 3:14 PM