Bosch HBG6764 6M Series - 15 Basic settings; 15.1 Overview of the basic settings; 15.2 Changing the basic settings; 15.3 Setting the time

Basic settings en
19
15 Basic settings
You can configure the appliance to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting Selection
Language See selection on the appli-
ance.
Clock Clock in 24-hour format.
Home Connect HomeConnect Settings
→"HomeConnect ",
Page19
Factory setting Reset
Do not reset
1
Audible signal Short duration (30 seconds)
Medium duration (1 minute)
1
Long duration (5 minutes)
Volume 5 settings
Button tone Switched on
Switched off (tone remains
for ⁠)
1
Display brightness 5 settings
Clock display Off
Digital
1
Analogue
Lighting Off during operation
On during operation
1
Childproof lock Button lock only
1
Door lock and button lock
Operation after switch-
on
Main menu
Types of heating
1
Assist
Night-time dimming Switched off
1
Switched on
Brand logo Display
1
Do not display
1
Factory setting (may vary according to model)
Basic setting Selection
Fan run-on time Recommended
1
Minimum
Pull-out system Not retrofitted (if shelf sup-
ports and a single set of
pull-out rails are fitted)
1
Retrofitted (if two or three
sets of pull-out rails are fit-
ted)
Sabbath mode Switched on
Switched off
1
1
Factory setting (may vary according to model)
15.2 Changing the basic settings
Requirement:The appliance is switched on.
1.
Press ⁠.
2.
Press "Basic settings".
3.
Press the required basic setting and use the control
ring to change it.
The red bar next to the text field identifies the basic
setting that is currently selected. Its corresponding
value is shown in the display.
4.
Use"Further settings" to scroll through the basic
settings and, if required, usethe control ring to
change any of these settings.
5.
To save your changes, press ⁠ and use "Save"
to confirm.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
▶
Press ⁠ and use "Do not save" to confirm.
a All changes will be discarded and not saved.
15.3 Setting the time
Requirement:The appliance is switched on.
1.
Press ⁠.
2.
Press "Basic settings".
3.
Press "Time".
4.
Use the control ring to change the time.
5.
To save your changes, press ⁠ and use "Save"
to confirm.
16 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
HomeConnect.
¡ Please also follow the instructions in the HomeCon-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page2