3.6 Removing the hot air motor
1. Remove the housing.
2. Discharge the HV capacitor.
3. Remove the rear cover.
4. Disconnect the Hot air assembly.
5. Remove oven sensor.
6. Unscrew the Hot air assembly and lift out carefully.
7. Disconnect the Hot air motor.
8. Remove the hex nut which attaches the inner fan blade to the shaft
of the hot air motor.
9. Pull out the inner fan blade in the hot air chamber.
10. Unscrew the hot air motor bracket.
11. Lift out the hot air motor with the bracket, and remove the outer fan
blade.
12. Unscrew the hot air fan motor from the hot air motor bracket.
Page 14 of 23 pages
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
______________________________________________________________________________________________________________________________________________________________________________
Copyright by BSH Home Appliances Corporation 1901 Main Street, Suite 600, Irvine CA 92614 700_ 58300000192890_ARA_EN_A 800 444-9091
To Next Page
Loading...
