Bosch ICP-SOL2-P Installation Guide

Table of contents
1
Introduction 8
1.1 About documentation 8
1.2 Related documentation 8
1.3 Bosch Security Systems, Inc. product manufacturing dates 9
2
System Overview 10
2.1 ICP-SOL2-P 10
2.2 ICP-SOL3-P 12
2.3 Configuration and Parts 13
2.3.1 Control panel capacities 13
2.3.2 Parts list 14
2.3.3 Order separately 14
3
Installation workflow 15
4
Accessories 16
4.1 Codepads 16
4.1.1 Icon Codepad Indicators 18
4.1.2 Text Codepad Indicators 19
4.1.3 Installer Menu 23
4.1.4 User Menu 26
4.1.5 All - No PIN menu 26
4.2 RADION keyfobs 27
4.3 Keyswitches 27
4.4 B308 Octo-output Module 28
4.5 WE800EV2 29
4.6 B810 receiver 30
4.7 RADION repeater 30
4.8 RADION detectors 30
4.9 A-Link Plus Software 30
4.9.1 Connect to the control panel remotely 32
4.9.2 Options 34
4.9.3 Communicating with the B426/B450 35
4.10 B426 Conettix Ethernet Communication Modules 38
4.11 B450 Conettix Plug-in Communicator Interfaces 38
4.12 Using the network communication modules 39
4.13 TF008 Plug Pack (TF008-B) 40
4.13.1 Install the transformer 40
4.14 Remote Security Control 40
5
Configuration 42
5.1 Installer Commands 42
5.1.1 Command 958 - Exit from Installer's Programming Mode without saving changes 42
5.1.2 Command 959 - Test the IUI-SOL-ADAPTER 42
5.1.3 Command 960 - Save and exit from Installer's Programming Mode 43
5.1.4 Command 961 - Reset the Control Panel to Factory Default Settings 43
5.1.5 Command 962 - Copy the Control Panel Memory to the IUI-SOL-ADAPTER 43
5.1.6 Command 963 - Copy the IUI-SOL-ADAPTER to the Control Panel 43
5.1.7 Command 965 - Set up Domestic Dialing Format 44
5.1.8 Command 966 - Enable/Disable the Automatic Stepping of Locations 45
5.1.9 Command 999 - Display the Software Version Number 45
Control Panel Table of Contents | en 3
Installation Guide 2014.07 | 00n | F01U298026

Bosch ICP-SOL2-P Specifications

General

Brand	Bosch
Model	ICP-SOL2-P
Category	Control Panel
Language	English