Enjoy watching your Indego
mowing the lawn for you!
5
Screen settings and
mapping your lawn
To operate your Indego ensure the isolator switch is turned on at the back of
the mower then press the
key. The screen will switch on after a few seconds.
Follow the on-screen instructions. Remember to note down your PIN code.
The buttons with the symbols ▲ or ▼ (up or down) allow to choose an option
within a menu screen. The buttons with the symbols ▶ or ◀ allow to go right or
left through the menu options. The
key will take you to the previous menu
screen. The
key will confirm the selection or take you to the following screen
within the menu.
“Set Language”
5.1
Please make a note of your
PIN code here:
Enter your personal PIN code.
Keep the PIN code secret from third parties.
▶ The mower won’t work without your PIN. If you
own a non-Connect mower and you have lost your
personal PIN code, you will have to contact Bosch
(see “After-Sales Service and Application Service”
contact details in the manual).
We recommend to register your mower through
the “My Bosch” website MyBosch-Tools.com
in order to recover your PIN faster.
▶ If you own an Indego Connect you can reset your
PIN code via the app.
5.2
Select time and date.
5.3
Press the
key to map the garden.
The blades do not rotate when the machine follows the wire
during mapping. Whilst mapping your Indego will follow the
wire around the edge of the lawn area. Mapping is complete
when the machine touches the docking station. Confirm
this on the screen. Then the mower will drive back for a few
meters to enter the docking station.
5.4
Confirm AUTO Calendar Function
After a successful installation, your Indego will know the
size and shape of your garden. You can either confirm the
recommended schedule for your lawn size, or set up a
mowing schedule in the “Menu > Calendar”. You can also
immediately begin to mow by pressing “Mow now”.
5.5
Set the height of cut for the grass.
Depending on the height of the grass in the lawn area,
it is recommended to start with a higher setting and then
gradually reduce the level.
Note: the Indego is designed to cut small pieces of grass
[5 mm] that then drop down and fertilise the soil.
5.6
If you have purchased an Indego Connect you can finish your
installation by setting up your account and completing the final
steps through the Bosch Smart Gardening app – download now
by scanning the QR code here:
GB
1918
To Next Page
Loading...
