To Next PageTo Next Page
Need help?Do you have a question about the Bosch ISC-CDL1-WA12G and is the answer not in the manual?
General| Color | White |
|---|---|
| Type | Motion Detector |
| Detection Range | 12 m |
| Mounting Height | 2.2 meters |
| Power Supply | 9 VDC to 15 VDC |
| Operating Temperature | -10°C to +50°C |
| Alarm Relay | 125 mA |
| Compatibility | Compatible with most control panels |
| Material | Plastic |
Overview of mounting options: base, flat wall/corner, and bracket use.
Diagram and description of terminal strip connections for power, alarm, tamper, and trouble.
Specifications for input power and how alarm contacts function under different conditions.
Functionality of tamper and trouble terminals, including wall tamper and trouble conditions.
Enabling or disabling the anti-mask feature and its proximity guidelines.
Enabling or disabling the anti-mask feature using switch 3.
Steps to perform a walk test and observe LED feedback for proper detection.
Adjusting PIR and microwave coverage using potentiometers and walk testing.
Diagnosing no response, continuous alarm, and potential causes.
Troubleshooting detection gaps in the under, edge, and far sections of the coverage area.
Interpreting LED flashes for masking, power-up proximity, self-test failure, and low voltage.
