Bosch KGN49AIBT - 3 Environmental Protection and Saving; 3.2 Saving Energy

Avoid property damageen
2 Avoid property damage
the
3.2 Saving energy
If you follow these instructions, your
device will use less power.
DANGER!
Tilting the device castors can damage
the floor when the device is moved.
▶ Transport the device with a
hand truck.
▶ When moving the unit, use floor
protection and do not zigzag. The
appliance can be damaged if the
base, drawers or appliance doors are
used as a seat or step surface.
▶ Do not step on or lean on plinths,
drawers or doors. Plastic parts and
door seals can become porous as a
result of contamination with oil or
grease.
▶ Keep plastic parts and door seals
free of oil and grease.
Metal or metal-look parts inside the
device may contain aluminum.
Aluminum reacts when it comes into
contact with acidic foods.
▶ Do not store unpackaged food in the
appliance.
choice of installation site
¡The device away from direct sunlight
protect radiation.
¡The device with the largest possible
Set up distance to radiators, stove
and other heat sources:
– Keep a distance of 30 mm to
electric or gas stoves.
– Keep a distance of 300 mm from
oil or coal stoves.
¡A small side wall
keep up.
¡Never the outer vents
cover or deliver.
Save energy during use
A notice:The arrangement of the
equipment has no influence on the
energy consumption of the device.
¡Open the device briefly and
close carefully.
¡Never use the inner ventilation openings
or cover or block the outer
ventilation openings. ¡Bought
groceries in one
Transport the cool bag and
quickly place it in the device.
¡Warm food and drinks
allow to cool before storing.
¡To keep the frozen food cool
use, place the frozen food in the refrigerator
compartment to defrost.
¡Between the food and
always leave some space to the
back wall.
3 environmental protection and
Save
3.1 Dispose of packaging
The packaging materials are
environmentally friendly and recyclable.
▶ Dispose of the individual components
separately according to type.
Standby mode
When the device is not in use, the
display automatically switches to
standby mode.
13