enTroubleshooting
Disturbance Cause and troubleshooting
On the device surface
Condensation forms on
the surface and shelves
in the device.
The water contained in warm and humid air condenses
on the colder surfaces of the device.
1.Wipe off the water with a soft, dry cloth.
2.Open the device as briefly as possible.
3.Make sure that the device is always properly closed.
Collects in the fruit and
vegetable container
there is often a lot of
condensation.
Depending on the storage quantity and the stored goods,
condensation forms in the fruit and vegetable container.
1.Remove the fruit and vegetable container.
→
page 25
2.Remove the bleed clips and insert upside down.
→
fig
12
Device hums, bub-
bert, whirrs, gurgles,
clicks or cracks.
No mistake. A motor is running, e.g. B. cooling unit, fan.
Refrigerant flows through the pipes. Motor, switches or
solenoid valves switch on or off. Automatic defrosting
takes place.
No action necessary.
device makes
noise.
Device is not level.
▶ Align the device using a spirit level and the screw
feet.
Device is not freestanding.
▶ Observe the minimum distances of the device.
Equipment parts wobble or jam.
▶ Check the removable equipment parts and replace
them if necessary.
Bottles or vessels are touching.
▶ Move the bottles or jars apart.
Super Freeze is on. No action
necessary.
28
To Next Page
Loading...
