Bosch MBS533B 0B Series - Understanding Your Appliance; Control Panel and Basic Functions

en Familiarising yourself with your appliance
8
Symbol Function Use
50–275 Temperature range Set the temperature in the cooking compartment in°C.
1, 2, 3
or
I, II, III
Grill settings Set the grill settings for Full-surface grill and Grill, small area (depending on
the appliance model).
1 = low
2 = medium
3 = high
Heating-up control
The heating-up indicator for the oven remains lit while
the appliance is heating.
Note:Due to thermal inertia, the temperature displayed
may differ slightly from the actual temperature inside
the cooking compartment.
Heating-up indicator ⁠
When the main oven ⁠ heats up, the symbol ⁠ also
lights up in the display. This symbol goes out when
heating is paused.
4.5 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Rails
The rails in the cooking compartment enable you to
place accessories at different heights.
→"Accessories", Page9
The shelf positions are numbered from bottom to top.
You can remove the rails, e. g. for cleaning.
→"Shelf supports", Page15
Main cooking compartment ⁠
The cooking compartment has five shelf positions.
Top cooking compartment ⁠
The cooking compartment has three shelf positions.
Self-cleaning surfaces
The self-cleaning surfaces in the cooking compartment are coated with a porous, matt ceramic layer and have a
rough surface. When the appliance is in operation, the self-cleaning surfaces absorb splashes from roasting or
grilling and break them down.
The following surfaces are self-cleaning:
Cooking compart-
ment
Self-cleaning sur-
faces
Cleaning
Main cooking
compartment ⁠
Back wall If the self-cleaning surfaces no longer clean themselves adequately
during operation, heat up the cooking compartment specifically to
the right temperature.
Lighting
The oven lamp lights up the cooking compartment.
With most types of heating and functions, the lighting
lights up during operation. When the function selector
is turned to bring operation to an end, the lighting goes
out.
The Oven light setting on the function selector can be
used to switch on the light without heating.
Note:The cooling fan also runs at position Oven light.
Cooling fan
The cooling fan switches on automatically during oper-
ation. The hot air escapes above the door.