MIC IP starlight 7000i Mounting | en 17
Bosch Security Systems Installation Manual 2017.09 | 0.12 | F.01U.xxx.xxx
Correct mounting orientation -
upright, inverted
Correct mounting orientation -
canted
Incorrect mounting orientation
Note the position of the visor when the camera is installed in inverted orientation. The visor
will now be near the body of the camera.
Note: For canted cameras, ensure that your mounting location provides the necessary
clearance (370 mm (14.6 in.)) for the camera head to pan.
Figure7.1: Top view of canted MIC7000 illustrating distance of pan clearance
The figure below illustrates the tilt range of the camera in upright orientation.
To Next Page
Loading...
