12/18 | Configuration of MIC IP 7000 HD – VIDEOJET decoder 3000 – for integration with analog CCTV
Version 1.3 | September 2015 Bosch Security Systems
4.3.2 MIC IP 7000 HD: FastAddress
A FastAddress (analog device ID) is required for the analog system to recognize the MIC IP 7000 HD
in the system. This address can be from 1 to 9999.
In the Miscellaneous menu, set the FastAddress of the camera to 1 or as required.
Figure 9: FastAddress menu under the Miscellaneous tab.
Important note: Whenever you change the FastAddress you have to reboot the camera to activate the
new FastAddress setting! Either power camera off/on, or use Reboot button in Installer Menu of web
browser