Configuration of MIC IP 7000 HD – VIDEOJET decoder 3000 – for integration with analog CCTV | 7/18
Bosch Security Systems Version 1.3 | September 2015
3.3 Multiple camera installation with matrix switchers or DVRs
Multiple-camera installation occurs when cameras from the new MIC IP 7000 HD family are installed
in an existing matrix without a short-term plan to upgrade to a full-recording matrix switcher
infrastructure. The analog integration in the MIC IP 7000 HD allows the installer to replace an existing
analog camera or add an IP camera to the current system by using following analog telemetry
protocols:
• Pelco P/D
• Bosch OSRD
• Forward Vision
Figure 3: MIC IP 7000 HD connectivity with Bosch Allegiant Matrix switcher.
Figure 4: MIC IP 7000 HD with generic matrix switcher using Pelco or Forward Vision protocol.
To Next Page
Loading...
