Bosch MPC-xxxx-B - In overview; Operating elements

Panel Controller In overview | en 19
Bosch Sicherheitssysteme GmbH Operation guide F.01U.076.969 | 6.0 | 2010.04
4 In overview
This chapter contains information about the following elements of the panel controller:
– Section 4.1 Operating elements
– Section 4.2 Display elements
– Section 4.3 Touch screen
– Section 4.4 Standby display
– Section 4.5 Display service department
4.1 Operating elements
The operating elements include points 1 - 3.
Function keys
To select a function, press the appropriate membrane key.
The following functions can be executed with the function keys:
1 Function keys 3 Key switch
2 Alphanumeric keypad 4 LED display
0
Bypass
Isolate
Maintenance
Switch to day mode
Search Function/
Element
Diagnostics
Configuration
Further functions
Reset
000
Fire
Control
Fault Bypass
Status
Te s t
Transmission Device
activated
Bypassed
bypassed
Transmission Device
Signals bypassed
Power
Fault
Fault System
Fault Transmission Devi ce
Fault Signals
Alarm
1
1
2
1
3
4
Display a list of the networked panels and establish a remote
connection with a networked panel (only valid for FPA-5000) or a
remote keypad.
Display the address of the service department, if programmed.
"Home" key. Call up the start menu.