To Next PageTo Next Page
Need help?Do you have a question about the Bosch MTS 6520 VCI and is the answer not in the manual?
Explains warning notices and symbols used in the manual.
Covers EMC directive compliance and potential interference.
Guidance on proper disposal of the VCI according to WEEE.
Details compliance with FCC rules for digital devices and RF energy.
Describes the MTS 6520 VCI's purpose in automotive diagnostics.
Specifies that the product is for skilled and instructed personnel.
Lists minimum PC/laptop requirements for the VCI software.
Details the components included in the base kit and configurations.
Explains the USB connection and its configuration requirements.
Describes setting up and using the wired Ethernet connection.
Covers the setup and configuration of wireless network communication.
Introduces the VCI Manager software for configuration and updates.
Explains the J2534 pass-thru functionality for vehicle programming.
Describes the DLC connection for vehicle communication.
Details the different power sources for the VCI.
Explains the role of AAA batteries for power interruption.
Lists the function of the VCI's LED indicators.
Lists the various serial data interfaces supported by the VCI.
Lists the non-serial data interfaces supported by the VCI.
Step-by-step guide to installing the VCI Manager software on a PC.
Guides users through initial hardware setup and connection to the PC.
Configures VCI for wired Ethernet connection using a network router.
Addresses issues where the VCI fails the Power On Self-Test.
Troubleshoots problems indicated by the VCI error LED.
Provides steps to resolve the VCI failing to power on.
Troubleshoots the VCI shutting off unexpectedly after disconnection.
Solves communication issues between VCI Manager software and the VCI.
Instructions for cleaning and storing the VCI properly.
Steps to recover corrupted VCI software after errors.
General| Brand | Bosch |
|---|---|
| Model | MTS 6520 VCI |
| Category | Diagnostic Equipment |
| Language | English |
