Bosch MTS 6534 User Manual

RNM VI
en User Manual
RNM VI
MTS 6534 / MTS 6535

Bosch MTS 6534 Specifications

General

Brand	Bosch
Model	MTS 6534
Category	Diagnostic Equipment
Language	English

Summary

Safety Instructions

High Voltage and Exhaust Gas Hazards

Covers dangers of high electrical voltage and inhaling exhaust gases.

Vehicle Operation Safety

Ensures safety during vehicle operation, including parking brake and battery clamp precautions.

Product Description VCI

User Group

VCI Kit Contents

Universal Serial Bus (USB)

VCI Manager Software

Product Description TS1 Trigger switch

Intended Use

Describes the purpose and intended application of the TS1 Trigger switch.

Operation

Getting Started

Installing the VCI Manager Software

Step-by-step guide for installing the VCI Manager software on a PC.

Setting Up the VCI Hardware

Checking PC and VCI Software Versions

Setting Up Wireless Communications

Enabling Access Point Wireless Communication

Enabling Point-to-Point Wireless Communication

Connecting the VCI to a Vehicle

Powering the VCI

Troubleshooting

VCI Does Not Pass Power On Self-Test (POST)

Addresses issues when the VCI fails its power-on self-test.

VCI Error LED Lights After Power On

Diagnoses problems indicated by the VCI's error LED after power-on.

VCI Fails to Power Up

Troubleshoots scenarios where the VCI does not power up.

Vehicle LED is Blinking Red

Explains the cause and solution for the Vehicle LED blinking red.

Suspected Defective Data Link Connector (DLC) Cable

Wireless Communication with Network Unsuccessful using WLAN dongle

PC Application is Unable to Communicate with the VCI over USB

PC Application is Unable to Communicate with the VCI over Wireless

Cleaning and Maintenance

Recovering the VCI Software

Procedure to recover the VCI software in case of corruption or update errors.

Recovery Procedure

Hardware Specifications