To Next PageTo Next Page
Need help?Do you have a question about the Bosch MTS 6531 and is the answer not in the manual?
General| Dimensions | 200 x 100 x 40 mm |
|---|---|
| Protection Class | IP40 |
| Current Consumption | 500 mA |
| Operating Temperature | 0 °C to +50 °C |
| Storage Temperature | -20°C - 70°C |
| Weight | 500 g |
| Interfaces | USB |
Specifies authorized personnel and supervision requirements for operating the MTS 6531.
Describes the MTS 6531 as a measuring instrument for automotive diagnostics and repair.
Details the process of installing the VCI Manager software on a computer for MTS 6531 configuration.
Guides users through the procedure to update the MTS 6531 firmware using VCI Manager.
Outlines steps for configuring the MTS 6531 for network communication via VCI Manager.
Explains how to connect the MTS 6531 to a vehicle's diagnostic port using the cable.
Provides recommendations for resolving issues indicated by error LEDs upon powering on the MTS 6531.
Offers troubleshooting steps for when the MTS 6531 does not turn on after power is applied.
Explains the cause and resolution for the vehicle LED flashing red on the MTS 6531.
Discusses reasons and checks for the MTS 6531 shutting off when disconnected during a session.
Guides on performing a cable test using VCI Manager to diagnose a faulty connection cable.
Offers solutions for when the application cannot communicate with the MTS 6531 via USB.
Provides troubleshooting steps for communication failures over wireless or Ethernet connections.
Guides on recovering the MTS 6531 software after corruption due to power failure or error.
