1 689 989 445 2019-07-01
|
Robert Bosch GmbH
4 | MTS 6531 | en
en – Content English
1. Symbols used 5
1.1 In the documentation 5
1.1.1 Warning notices – structure and explanation 5
1.1.2 Symbols – designation and explanation 5
1.2 On the product 5
2. User instructions 6
2.1 Intended users 6
2.2 FCC Compliance (USA) 6
2.3 Open-source software (OSS) 6
2.4 Electromagnetic compatibility (EMC) 6
2.5 Range of application 6
2.6 Wireless link (Bluetooth and WLAN) 6
2.7 Other applicable documents 8
3. Safety instructions 8
4. Product description 8
4.1 Intended use 8
4.2 Scope of delivery 8
4.3 MTS 6531 Ports and control elements 9
4.4 Universal Serial Bus (USB) Port 9
4.5 Wireless Local Area Network (WLAN) 9
4.6 Ethernet 9
4.7 Additional MTS 6531 Features 9
4.7.1 Data transfer 9
4.7.2 Power Supply 10
4.7.3 LED status display 10
4.8 VCI Manager program 10
4.9 System requirements 10
5. Operation 11
5.1 Installation notes 11
5.2 Installing the VCI Manager software 11
5.3 Setting up the diagnostic device hardware 11
5.3.1 Identifying your diagnostic device 11
5.3.2 Updating the diagnostic device software 11
5.3.3 Configuring the MTS 6531 using VCI Manager
12
5.3.4 Checking the computer and MTS 6531
software versions 12
5.4 Setting up wireless communications 13
5.4.1 Activating the WLAN link via an access point 13
5.4.2 Enabling point-to-point wireless communication
14
5.4.3 Setting to factory default 15
5.5 Connecting the diagnostic device to a vehicle
15
5.6 Resetting the MTS 6531 16
5.7 Loopback self-test 16
6. Troubleshooting 17
6.1 MTS 6531 error LED lights after power On 17
6.2 The MTS 6531 fails to power up 17
6.3 "Vehicle LED is flashing red 17
6.4 MTS 6531 speaker is beeping 17
6.5 MTS 6531 turns off immediately when
disconnected from the vehicle during a
diagnostic session 18
6.6 "Checkmark" LED flashing on the MTS 6531 18
6.7 Suspected defective diagnostic connection
cable 18
6.8 Wireless communication with network
unsuccessful using DWA131 E1 dongle 19
6.9 VCI Manager displays yellow icon over MTS
6531 after previous use 19
6.10 Computer application is unable to communicate
with the MTS 6531 over USB 19
6.11 Computer application is unable to communicate
with MTS 6531 over wireless or Ethernet 20
7. Cleaning and Maintenance 20
7.1 Restoring the system software on the MTS 6531
(Recovery) 20
7.2 Spare and wearing parts 20
8. Decommissioning 21
8.1 Temporary shutdown 21
8.2 Changing location 21
8.3 Disposal 21
9. Glossary 21
10. Technical data 22
To Next Page
Loading...
