Bosch MTS 6535 User Manual

RNM VI
en User Manual
RNM VI
MTS 6534 / MTS 6535

Bosch MTS 6535 Specifications

General

Brand	Bosch
Model	MTS 6535
Category	Diagnostic Equipment
Language	English

Summary

Warranty Information

Safety Instructions

High Electrical Voltage Danger

Warns of risk of personal injury or death from high electrical voltage in vehicles.

Dangerous Exhaust Gas Warning

Advises on risks of inhaling exhaust gases and the need for ventilation.

Parking Brake Warning

Stresses the importance of securing the parking brake before vehicle checks.

Battery Clamps Polarity Caution

Warns about potential damage from incorrect battery clamp connection and polarity.

Product Description VCI

Intended use

User group

VCI Kit Contents

VCI Connectors and Controls

VCI Manager Software

Additional VCI Features

LED status

LED Error Indicator

LED Vehice Communication

LED PC Host Communication

Product description TS1 Trigger switch

Intended use

Operation

Getting Started

Installing the VCI Manager Software

Guides through the process of installing the VCI Manager software on a PC.

Setting Up the VCI Hardware

Covers the initial setup steps for the VCI hardware components.

Installing Your Wireless Adapter

Identifying Your VCI

Updating the VCI Software

Configuring the VCI using VCI Manager

Check PC and VCI Software Versions

Setting Up Wireless Communications

Enabling Access Point Wireless Communication

Enabling Point-to-Point Wireless Communication

Set Factory Default

Connecting the VCI to a Vehicle

Powering the VCI

Troubleshooting

VCI Does Not Pass Power On Self-Test (POST)

Addresses issues where the VCI fails its initial power-on self-test.

VCI Error LED Lights After Power On

Explains the meaning of error LED indicators after the VCI powers on.

VCI Fails to Power Up

Provides solutions for the VCI not powering up when external power is applied.

Vehicle LED is Blinking Red

Describes the condition and causes for the vehicle LED blinking red.

Suspected Defective Data Link Connector (DLC) Cable

Offers troubleshooting steps for suspected issues with the DLC cable.

Wireless Communication with Network Unsuccessful using WLAN dongle

Helps resolve problems with unsuccessful wireless communication using the WLAN dongle.

VCI Manager Displays the Yellow Icon over the VCI after previous use

PC Application is Unable to Communicate with the VCI over USB

PC Application is Unable to Communicate with the VCI over Wireless

Recovery Procedure