1 689 989 355 2019-04-08| Bosch Automotive Service Solutions GmbH
Symbols Used | MTS 6534 / MTS 6535 | 3 enen
Symbol Designation
Read and follow all instructions, warnings and oth-
er information in these operating instructions before
switching on, connecting and operating VCI.
The use of VCI and the recording of diagnostic data
while driving may only be carried out by trained and
instructed workshop staff.
EU
USA
Russia
Ukraine
1. Symbols Used
1.1 Warning Notices -
Structure and Meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶ Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-obser-
vance:
Key word Probability of
occurrence
Severity of danger if in-
structions not observed
DANGER Immediate impend-
ing danger
Death or severe injury
WARNING Possible impending
danger
Death or severe injury
CAUTION Possible dangerous
situation
Minor injury
1.2 Symbols in this Document
Symbol Designation Explanation
!
Attention Warns about possible property damage.
i
Information Practical hints and other
useful information.
1.3 Symbols on the Product
! Observe all warning notices on products and ensure
they remain legible.
2. Warranty information
2.1 Agreement
By using the product you agree to the following regulations:
Copyright
Software and data are the property of Bosch or its
suppliers and protected against copying by copyright
laws, international agreements and other national legal
regulations. Copying or selling of data and software or
any part thereof is impermissible and punishable; in
the event of any infringements Bosch reserves the right
to proceed with criminal prosecution and to claim for
damages.
Liability
All data in this program is based - where possible - on
manufacturer and importer details. Bosch does not ac-
cept liability for the correctness and completeness of
software and data; liability for damage caused by faulty
software and data is ruled out. Whatever the event,
Bosch liability is restricted to the amount for which the
customer actually pays for this product. This disclaimer
of liability does not apply to damages caused by intent
or gross negligence on the part of Bosch.
Warranty
Any use of non-approved hardware and software will
result in a modification to our product and thus to exclu-
sion of any liability and warranty, even if the hardware or
software has in the meantime been removed or deleted.
No changes may be made to our products. Our products
may only be used in combination with original acces-
sories and original service parts. Failing to do so, will
render null and void all warranty claims.
Australia, New Zealand
South Korea
China RoHS
To Next Page
Loading...
