AUTODOME IP 4000i/AUTODOME IP 5000i/
AUTODOME IP 5000i IR
Camera | en 39
Bosch Security Systems User Manual 2018.05 | 1.1 |
– Using the Live preview window as reference, navigate to the scene that you want to
define as a pre-position.
2. Click the button Add pre-position (“+”) to define the pre-position.
3. Select a number for the pre-position, from 1 to 256.
4. Type an optional name for the pre-position, up to 20 characters long.
5. Click OK to save the pre-position to the list Pre-positions.
6. To include the pre-position in a standard tour, select the check box to the left of the field
“Include in standard tour (marked with *).” An asterisk (*) appears to the left of the
name in the list Pre-positions.
7. For IR cameras only: To add IR light to the pre-position, select the check box to the left of
the field “IR light (marked with #)”.
8. To delete a pre-position from the list, select the pre-position and click the button Delete
pre-position ( ).
9. To overwrite an existing pre-position:
– Use the PTZ controls to navigate to the new pre-position.
– In the list Pre-positions, select the pre-position that you want to overwrite.
– Click the button Overwrite pre-position (disk icon) to apply the new pre-position to
the existing pre-position.
– To change the name of the pre-position, double-click the pre-position in the list.
Then, change the name in the dialog box Edit Pre-position and click OK.
10. To view a pre-position in the preview window, select the pre-position in the list and click
the button Show pre-position (eye icon).
11. To view a pre-position from the Live page:
– Click a pre-position number in the list Pre-positions.
OR
– Use the keypad and the button Show pre-position in AUX Control.
To define a Pre-position Tour:
1. Create the individual pre-positions.
By default, all scenes in the list Pre-positions are in the Pre-position Tour.
2. To remove a pre-position from the tour, select the pre-position in the list and uncheck the
box Include in standard tour (marked with *).
3. Select a dwell time from the drop-down list Standard pre-position tour.
4. To start the Pre-position Tour:
Return to the Live page.
Click AUX Control.
Type 8 in the input box and click AUX on.
5. To stop the tour, type 8 and click AUX off.
6.14 Sectors
Sector
The camera’s pan capability is divided into 16 sectors, for a total of 360°.
To define a title for sectors:
1. Place the cursor in the input box to the right of the sector number.
2. Type a title for the sector, up to 20 characters long.
3. To blank the sector, click the check box to the right of the sector title.
To Next Page
Loading...
