12
|
Quick Start Guide English
575610 Rev B | 03.2016
Bosch Automotive Service Solutions Inc.
Function Menu Description
Drive Cycle
Monitor
Special Tests Displays the current state of the
vehicle’s OBD II Monitors in Real-
Time.
English/Metric System Setup Changes measurement units.
Erase Codes Diagnostic Codes Deletes DTCs from vehicle’s mem-
ory.
I/M Monitors Special Tests Displays a snapshot of the state of
the vehicle’s OBD II Monitors. This
function only applies to OBD II
compliant vehicles.
IVSC KOEO
Codes
IVSC KOER
Codes
Diagnostic Codes This function executes the Ford
Key On Engine Running and Off
Self Test for Integrated Vehicle
Speed Control (IVSC). It tests the
inputs, outputs, and sensor ranges
while the engine is running or off.
Any faults will be displayed as
DTCs. This function only applies
some Ford OBD I vehicles.
Keypad Test System Setup Verifies that the keys are working
correctly.
Language
Setup
System Setup Allows the user to change the
language used by the tool. English
is the default.
Long PID
Names
System Setup Allows the user to enable/disable
the tool scrolling the complete PID
name on the bottom line of the
display while viewing live data or
viewing freeze data.
To Next Page
Loading...
