Bosch OBD1300 - Page 13

Quick Start Guide | 13English
575610 Rev B | 03.2016
Bosch Automotive Service Solutions Inc.
Function Menu Description
Memory Test System Setup Checks RAM and Flash ROM.
MIL Status Special Tests Displays whether the Malfunction
Indicator Lamp is on or off. This
function only applies to OBD II
compliant vehicles.
Modules
Present
Special Tests Views the status of all OBD II
compliant modules. This function
only applies to OBD II compliant
vehicles.
O2 Monitor
Tests
Special Tests The O2 Monitor Tests is NOT an
ON-DEMAND TEST. This Function
displays oxygen sensor monitoring
test results from the vehicle’s
memory. This function only applies
to OBD II compliant vehicles.
Oil Light
Reset
Special Tests This function is used to reset the
change oil light on applicable
vehicles. The function only appears
on the menu when supported by
the currently selected vehicle.
On-Board
Systems
Special Tests Scan tool controls the operation of
vehicle components, tests or sys-
tems. This function only applies to
OBD II compliant vehicles.