English | 31
Bosch Power Tools 1 609 92A 1XZ | (5.9.16)
To measure the corner angle, place the fold-out and base legs flat against
the walls or set a known corner angle on the measuring tool.
Press button 7 again to store the measured corner angle for the compound
mitre. “CNR” and the current angle will appear on the display.
“3. MTR”: Calculating the Mitre Angle
Press button 7 again. “MTR” and the calculated mitre angle for the chop
and mitre saw are indicated on the display.
The horizontal mitre angle defines the rotation of the saw table (MTR).
“4. BVL”: Calculating the Bevel Angle
Press button 7 again. “BVL” and the calculated bevel angle for the chop
and mitre saw is indicated on the display.
The bevel angle defines the incline of the saw table (BVL).
MTR
OBJ_BUCH-2116-003.book Page 31 Monday, September 5, 2016 5:52 PM
To Next Page
Loading...
