Bosch PAVIRO - History; IRIS-Net V3.2.1 and V3.2.2

6 en | History PAVIRO
2018.08 | V1.1 | EN 54 devices supported by IRIS-
Net
Software manual Bosch Security Systems
3 History
3.1 IRIS-Net V3.2.1 and V3.2.2
This section lists:
– all IRIS-Net related firmware for PAVIRO that is delivered with IRIS-Net V3.2.1 and V3.2.2,
and
– the changes compared to previous versions.
The certified devices and supported options are listed in the corresponding DoP:
– DECL DoP EN54-16 EN54-4 PAVIRO V11
IRIS-Net supported devices/modules
– PVA-4CR12 and PVA-4R24
– PVA-2P500
– PVA-15CST
– PVA-15ECS
– OM-1
Configuration software note
Product Firmware
version
Comments
PVA-4CR12 V1.19.1 – Bug fix where a gain change in the configuration
software could lead to a watchdog reset.
– Bug fix where EOL (End Of Line) stays deactivated
when an EOL module gets lost during a running EVAC
signal.
PVA-4R24 V1.5.0
PVA-2P500 V1.1.0
PVA-15CST /
PVA-15ECS
V2.3.0
OM-1 V1.15.118
Devices with firmware
V3.2.2 does not provide updates for PAVIRO. IRIS-Net V3.2.2 and V3.2.1 are identical for
PAVIRO .
IRIS-Net V3.2.1 and V3.2.2 are patch updates which require IRIS-Net V3.2.0 to be installed up
front.